Fan control, Data loss, Instant – ETC Source Four LED v1.6.0 User Manual User Manual
Page 50: Hll-2min, Hll-4ever
44
Source Four LED Profile v1.6.0 User Manual
Fan Control
Fan Control adds another DMX channel of control when set to DMX. Alternate settings are
Slow, Fast, and Automatic. For more information, see
Step 1:
On the DMX Settings menu, scroll to Fan.
Figure-3.7 Setting the Fan Mode on the DMX Settings Menu.
Step 2:
Press [
] to scroll through the available options.
Step 3:
Press [
] or [
] to commit the option.
Data Loss
Data Loss is what happens to the fixture's output when the external control signal (either
DMX or data from the Master fixture in a Master/Slave configuration) is lost. The choices
are as follows:
Instant
As soon as the control signal is lost, the fixture shuts off output and the LED array goes
black.
HLL-2Min
Hold last look for 2 minutes. The fixture retains its last setting for 2 minutes after the control
signal is lost, after which it shuts off output.
Cycling power to the fixture before the 2 minutes have passed will clear the last look and
the LEDs will remain off until control signal is restored.
HLL-4ever
Hold last look forever. After data is lost, the fixture maintains its last look until power is
removed from the fixture or control signal is restored. The last look will not be restored after
power has been cycled.
Step 1:
On the DMX Settings menu, scroll to Data Loss.
Figure-3.8 Setting the Data Loss Type on the DMX Settings Menu.
Step 2:
Press [
] to toggle through the three options.
Step 3:
Press [
] or [
] to commit the option.
DMX Settings
DMX Start Address:
101
DMX Profile:
Direct
Strobe Mode:
Enabled
Data Loss:
Instant
Fan Mode:
Auto
6/15 Fan
DMX Settings
DMX Start Address:
101
DMX Profile:
HSIC
Strobe: Enabled
Data Loss
: Instant
Plus Seven:
Enabled
DMX Profile:
6 chan
2/15 Hue Fine