ETC Source Four LED v1.6.0 User Manual - Manual (Page 72)

66 Source Four LED Profile v1.6.0 User Manual
Local Settings
The Local Settings menu gives you several options that affect the LCD and other functions
of the fixture.
Figure-3.38 Selecting Local Settings on the Advanced Menu.
Step 1: On the Advanced Menu, scroll to Local Settings.
Step 2: Press [ ].
Step 3: Scroll to any of the menu choices and press [ ].
Backlight
You can change the brightness of the LCD backlight. The brightness level is 10 to 100%.
The default is 100%.
Step 1: With Backlight selected, press [ ]to select the value.
Step 2: Press [ ] or [ ] to set the desired brightness percentage. The effect can be
seen as you make the adjustment.
Step 3: Press [ ].
BLght time out
You can change the length of time the LCD backlight remains on after a UI button has been
pressed. The options are 30 seconds, 1 minute, 5 minutes, 15 minutes, and never. The
default is 1 minute.
Step 1: With BLght time out selected, press [ ].
Figure-3.39 Setting Backlight Timeout.
Step 2: Continue to press [ ] until the desired time is indicated.
Step 3: Press [ ]or [ ] to commit the option.
Advanced Menu
DMX Settings
LED Settings
Presets and Sequences
Diagnostics
Local Settings
Copy All Settings
Local Settings
Backlight : 100%
BLght time out: 1 min
Language: English
Status Indicators:
Off
OverTemp: Visible
Restore Defaults
Local Settings
Backlight: 100%
BLght time out : 1 min
Language: English
Status Indicators:
Off
OverTemp: Visible
Restore Defaults