ETC Source Four LED v1.6.0 User Manual - Manual (Page 74)

68 Source Four LED Profile v1.6.0 User Manual
OverTemp
You can change how an over-temperature situation is indicated in order to control stray
light.
Visible (Lustr+, Series 2 Lustr, and Studio HD)
The fixture produces a low-level, red light from the LED array, displays a warning message
on the LCD, turns on the LCD backlight, and turns on the error indicator light.
Visible (Daylight and Tungsten)
The fixture produces a low-level light from only some of the LEDs in the LED array, displays
a warning message on the LCD, turns on the LCD backlight, and turns on the error indicator
light.
Dark
The fixture turns off the LED array entirely and displays a warning message on the LCD
without turning on the LCD backlight.
Step 1: With OverTemp selected, press [ ].
Figure-3.42 Setting Over Temperature Indication.
Step 2: Continue to press [ ] to toggle between the two options.
Step 3: Press [ ] or [ ]to commit the option.
For more information, see Thermal Shutdown Warning, page 39 .
Restore Defaults
You can restore the fixture to the factory settings. This function clears all custom settings
including all changes to Presets and Sequences.
Step 1: With Restore Defaults selected, press [ ].
Step 2: When asked if you are sure, select Yes and press [ ].
Step 3: Press [ ].
N o t e : When returning to normal operation, after the fixture has been in a shut-down status,
the LED array automatically transitions its output back to the current control signal
or stand-alone operation over a 10-second crossfade. There is no required reset
function once the fixture temperature returns to a safe level.
Local Settings
Backlight: 100%
BLght time out:
1 min
Language: English
Status Indicators:
Off
OverTemp : Visible
Restore Defaults