ETC Source Four LED v1.6.0 User Manual - Manual (Page 57)

3
Operation 51
Presets (Lustr+, Series 2 Lustr, and Studio HD)
A Preset is a single, static look or color mix. The Source Four LED Profile fixture comes with
24 default configurations. Only one Preset can be active at a time. You can activate any of
the Preset color mixes and customize each one.The following table lists the default Preset
color mixes, most of which are also available as Quick Color options. See “Quick Color
(Lustr+, Series 2 Lustr, Studio HD)” on page 60.
Presets (Daylight and Tungsten)
The Daylight and Tungsten fixtures come with 24 available slots for Presets. Only one
Preset can be active at a time. You can activate any of the Presets and customize each
one. Daylight and Tungsten fixtures have Presets that can define both Intensity and Strobe
values. There are no default Presets that come pre-configured from the factory.
Figure-3.16 Selecting Presets on the Presets and Sequences Menu.
Preset Default Color Available as Quick Color
1 White Yes
2 Warm Yes
3 Cool Yes
4 Minus Green Yes
5 Lite Pink Yes
6 Lite Gold Yes
7 Yellow Yes
8 Dark Straw Yes
9 Dark Amber Yes
10 Orange Yes
11 Red --
12 Med Pink Yes
13 Dark Pink Yes
14 Magenta --
15 Purple Yes
16 Dark Lavender Yes
17 Deep Purple Yes
18 Clear Blue Yes
19 Lite Blue Yes
20 Med Blue Yes
21 Primary Blue Yes
22 Blue-Green Yes
23 Lite Green Yes
24 Green --
Presets
Preset : * 23
Status: Active
Fade Time:
00:02
Delay Time: 00:00
Edit
Copy to Other Fixture
Save DMX as Preset
Presets and Sequences
Focus: Off
Presets
Sequences
Quick Color
Preset 1 is Active
No Sequence is Active