It infrastructure rap/rac1000 – ADS-TEC RAP/RAC1000 User Manual User Manual

Page 94

Text mode
Original mode

IT Infrastructure RAP/RAC1000

Use fixed Access Point BSSID:
If this option is enabled, you can enter the MAC address of an Access Point. This option is

helpful with Access Points sharing the same SSID, because the respective device can still
individually be addressed.
Confirm this action subsequently with Apply settings.
S

TATE

Access client view:

The state display of the WLAN-1 interface shows data traffic characteristics. The display

can be updated by using the Reload button.