ADS-TEC RAP/RAC1000 User Manual - Manual (Page 26)

IT Infrastructure RAP/RAC1000
26
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
B EHAVIOUR OR S TATUS I NDICATORS DURING R ESET TO D EFAULT S ETTINGS
The reset button located under the interface cover may be used to reset the Access Point /
Client to factory default settings at any time and without regard to the current device
configuration.
To reset device to default settings, press reset button and switch on the device. Keep reset
button pressed for approx. 20 seconds. Button may be released as soon as left HOST
indicator LED turns green. The following overview assumes that no cable is connected to
HOST. Please refer to the overview to monitor the reset to factory defaults.
PWR S TATUS D ESCRIPTION
L+ Device is connected to power supply via POWER and
ready for use.
HOST
LINK / ACT LED S FLASH CONTINUOUSLY
LINK / ACT LED S EXTINGUISHED