ADS-TEC RAP/RAC1000 User Manual - Manual (Page 16)

IT Infrastructure RAP/RAC1000
16
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
3.2 S COPE OF S UPPLY
Package contents need to be checked for integrity and completeness:
• 1 device
• 1 x two-pole COMBICON plugs (in case of 24V DC devices)
Manufacturer: Phoenix Contact
Item description/item short text: FMC 1,5 / 2-STF-3,5
• 1 x three-pole COMBICON plugs (in case of 230V AC devices)
Manufacturer: Phoenix Contact
Item description/item short text: MC 1,5 / 3-ST1F-5,08
• Four or eight antennas (depending on variant)
• Grommets / blanking plugs
• Installation kit with mounting plate and fasteners (fixed to device)
• Quick Install Guide / Quick Mount Guide
• GNU General Public License
• Service CD
3.3 E NVIRONMENTAL C ONDITIONS
The unit can be put into operation and used under the following conditions. Failure to
observe any one of the specified data will immediately terminate all warranty conditions.
ads-tec cannot be held liable for any damages arising due to improper device or unit use
and handling.
• Permissible ambient temperature
during operation from -20 … 55° C
during storage from -20 … 55° C
• Humidity
during operation 10 to 85%, without condensate
during storage 10 to 85%, without condensate
• Vibration
during operation 1 G, 10 to 500 Hz
(DIN EN 60068-2-6)
Vibration certificate:
MIL-STD-810F 514.5 C-2
5 to 500 Hz (01-01-2000)
• Shock
during operation 5 g, with a 30 ms half-cycle
(DIN EN 60068-2-29)