2 led status indicators during operation, Tatus, Ndicators during – ADS-TEC RAP/RAC1000 User Manual User Manual
Page 25: Peration, It infrastructure rap/rac1000
IT Infrastructure RAP/RAC1000
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
25
S
WITCH
1
/
2
/
3
/
4
L
EFT
LED
LINK
Interface not connected to remote station.
L
EFT
LED
LINK
Interface connected to remote station and ready for
use.
R
IGHT
LED
ACT
No data transfer between device and remote
station.
Right LED
ACT
Indicates data transfer between device and remote
station.
5.2
LED
S
TATUS
I
NDICATORS DURING
O
PERATION
B
EHAVIOUR OF
S
TATUS
I
NDICATORS DURING
B
OOT
S
EQUENCE
The boot sequence is initiated as soon as the Access Point / Client is connected to a power
supply. The HOST indicator LEDs can be used to monitor the boot sequence. Please refer
to the following overview to verify the device boots correctly. The overview assumes that
no cable is connected to HOST.
PWR
S
TATUS
D
ESCRIPTION
L+
Device is connected to power supply via POWER and
ready for use.
HOST
LINK
/
ACT
LED
S FLASH BRIEFLY ONCE
L
ED FLASHES SLOWLY
,
THEN QUICKLY
(20
X
)
LED
EXTINGUISHED