ADS-TEC RAP/RAC1000 User Manual - Manual (Page 82)

IT Infrastructure RAP/RAC1000
82
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
8.2.6 P ING TEST
By using the Ping test option you can check if a connected remote station can be reached
or not. The Ping test sends an echo request packet to the destination address of the
remote station to be tested and evaluates the test information.
Please enter the destination address to be tested in form of an IP-address in the
designated box. Additionally, the Number of ping messages to be sent must be specified. It
is limited to 10 packets.
By clicking on the Apply settings button the ping test will start.
After a short time an overview will appear which shows the ping test process steps and
result. The overview indicates both the sent and the received packet status.
The Ping test is finished by pressing the Continue button.