It infrastructure rap/rac1000 – ADS-TEC RAP/RAC1000 User Manual User Manual

Page 130

Text mode
Original mode

IT Infrastructure RAP/RAC1000

130

NABLE

SNMP

TRAP GENERATION

Allows to enable/disable the SNMP trap function. With the function enabled, events like

e.g. Link Up / Link Down events can be received and traced back. The firewall can trace
back, from which device the message originated, because its IP address is included.
SNMP Trap Community Name:
Here you enter the Community Name for traps.

SNMP Trap Receiver IP:
Enter the IP address of the trap receiver here.

W

EBSERVER

Access to the Access Point web interface using the protocols http or https can be set up

using the Webserver > Access control menu.

The web server integrated in the Access Point for configuration can only be reached using
the activated protocols.

Note:
You should assign an individual certificate to each Access Point for an optimum in security.