It infrastructure rap/rac1000 – ADS-TEC RAP/RAC1000 User Manual User Manual

Page 86

Text mode
Original mode

IT Infrastructure RAP/RAC1000

Activate Spanning Tree Protocol:
The spanning tree protocol is used for avoiding loops in particular in network environments

with switching. With this function activated, redundant network lines can be generated.
Activate NAT on:
By enabling the Network Address Translation (NAT) option on the selected interface, a

private IP address range is masked with a global IP address. Activating NAT is
recommended with DSL connections.
Standard gateway:
In this option, you can specify the IP address of the used gateway.

Click subsequently on Apply settings.
Now your changes are activated.

Hinweis:
Die folgenden Konfigurationsmöglichkeiten sind nur bei entsprechender

Ausstattungsvariante vorhanden.