It infrastructure rap/rac1000 – ADS-TEC RAP/RAC1000 User Manual User Manual
Page 194
IT Infrastructure RAP/RAC1000
194
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
Note:
The private network can appear with identical configuration within the whole setups as
often as desired. That means it is possible to configure all terminals with IP 192.168.0.1
and all WLAN Clients at the HOST interface with IP 192.168.0.89. Just the WLAN-1 IP
address must be unique in the network; but here it is also possible to use a DHCP server.
A
CTIVATING THE
E
XTENDED
B
ACKGROUND
S
CANNING AND
IP
R
OUTER
M
ODE
To apply the „Extended Background Scanning and IP Router“ mode to the WLAN Client,
the operation mode has to be changed accordingly under „Configuration IP
Configuration“.
Here it has to be observed that NAT is activated at the WLAN-1 interface if a „Disguise“ is
desired. Otherwise, correct routes have to be provided in the whole wireless network.