ADS-TEC RAP/RAC1000 User Manual - Manual (Page 63)

IT Infrastructure RAP/RAC1000
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
63
R ULE SET L AYER AND I NTERFACES
The track of the packets is adjusted via the dialogue window, to which this rule set shall be
applied. Both an inbound interface (where the packets come in) and an outbound interface
(where the packets are to leave the device after having been accepted) are required.
Depending on configuration, the following additional interfaces are available on Layer 3:
L3-VPN /Service/IPsec
E XAMPLE :
S YMBOL I NTERFACE A CTION
== Incoming interface: HOST filters all inbound data packets
on HOST
!= Outgoing interface: WLAN-2 filters all outgoing data
packets on all ports, except
for WLAN-2
Note:
If you do not wish to filter particular ports, choose the default menu item (i.e. the asterisk
item).
Confirm your input by clicking Next.