It infrastructure rap/rac1000 – ADS-TEC RAP/RAC1000 User Manual User Manual

Page 129

IT Infrastructure RAP/RAC1000

129

SNMP

READ ONLY ACCESS

SNMP

READ

WRITE ACCESS

Note:
Select if you want to configure read-only or read/write access rights according to your

requirements, and fill your data in the corresponding mask.

SNMP Community Name:
The name to be entered here is comparable with a password. Frequently used default
settings are Private or Public.

SNMP Community IP:
Access to the specified Community Name is restricted to the following IP address.

Note:
If you want to allow all source IPs, select the following IP: 0.0.0.0

SNMP Community network mask:
Here you must enter the corresponding network mask for this IP address.

SNMP

USERNAME AND ENCRYPTION

Note:
This function is available only if SNMPv3 was selected. Select if you want to configure

read-only or read/write access rights according to your requirements, and fill your data in

the corresponding mask.

User name:
Assign a user name for authentication with the SNMPv3 protocol.
Password:
Assign a password to your user name.

Note:
The authentication protocol used with this login is MD5.

Preshared Key for encryption:
The preshared key (PSK) is a key that consists of a combination of numbers and letters

and can be used in addition to user name and password. A randomly generated number
code, which may be used as a preshared key, can be created by using the "Generate

PSK" button.