2N Lift8 v1.5.2 - Manual (Page 85)

85
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Incoming Call
The control centre can also call back to the communicator. The CU automatically
receives every incoming call, identifies itself and, via a voice menu (DISA), offers you
another function to get through to the required Audio Unit. Incoming calls are time
limited as outgoing calls and are processed in the same way (extension, termination).
Press 0 in the voice menu for connection with the last-calling Audio Unit.
Incoming Call Voice Menu
Welcome, this is a 2N Lift 8 communicator
Press 0 to dial the last-calling Audio Unit
Enter the lift number X to dial another Audio Unit
Press 1 to dial the lift cabin
Press 2 to dial the cabin roof
Press 3 to dial the lift bottom
Press 4 to dial the shaft bottom
Press 5 to dial the machine room
Press
o return to the main menu # t
Press 9 for administration
Press 1 to enter the programming menu
Press 2 to terminate the rescue process
Press 3 to listen to your communicator info
Press
o return to the main menu # t
Press o end the call # t
Call Sequencing
If another request arises during communication, the calls are ordered according to
priorities: Fireman has the highest priority, followed by Alarm. These calls suspend any
lower-priority call. Calls with identical priorities are queued and processed one after
another. Having done that,
recovers the suspended activity if possible. L8