Before you start, Mounting, Electrical installation – 2N Lift8 v1.5.2 User Manual

Page 49

2N TELEKOMUNIKACE a.s., www.2n.cz

immediately. Speak HandsFree or use a handset for better acoustic properties.

Press

for more than 2 s to display the voice menu.

Before You Start

Requirements

Connect a handset supplied by the manufacturer to the Audio Unit to avoid
handset operation error.

Product Completeness Check

Check the product for completeness before installation.

1 Audio Unit
1 handset
2 wall plugs
2 wall plug screws
7–8 jumpers for common machine room configuration

Mounting

The Audio Unit is typically mounted on a wall using the wall plugs and screws included
in the delivery.

Electrical Installation

Description of Connectors

There are 3 connectors to the right under the cover:

Caution

If no number is specified in the ALARM memory – set 2 (021–026), the
Audio Unit dials the numbers defined in the ALARM memory – set 1
(011–016).
Push the ALARM button to call the control room or machine room Audio
Unit configured as an intercom.
The ALARM and TRIPHONY buttons shine even at relax.