Upgrade, Licences – 2N Lift8 v1.5.2 User Manual

Page 113

113

2N TELEKOMUNIKACE a.s., www.2n.cz

Figure:

Devices – Connected Units – Schematic View of Connected Units Menu

Upgrade

The Upgrade menu helps you upgrade the

firmware via two menus: List of

applicable parameters and List of applicable voice menus. Click on the appropriate
name to select the FW version and voice menu type to be loaded to the

. Having

selected the items, click Upgrade to make the

load the new

2N Lift8 Service Tool

FW and voice menu into the

Licences

The Licences menu is used for adding licence files. The licences to be added to the

are only applicable in the UMTS/GSM module versions. The licence enables/disables the
network (provider) to which the device shall log in. Enter the IMSI code into the
licence: particularly the MCC and MNC to define the country and provider permitted for
the

. Enter a greater portion of the IMSI code to specify the SIM cards to be used in

one network. You can add up to 10 IMSI codes to the licence. Contact your 2N Lift8

supplier or the manufacturer's Technical Support department (

) for the

[email protected]

licence file.

Having acquired the licence file, click Open from file and Load to device to open a file
browser with the licence location and click Confirm. The program will notify you of the

Caution

Having upgraded the FW you will be notified of the

restart. After

confirmation, the restart will be made and the application will be
disconnected. Reconnection will not be possible until the system upgrades
the Audio Units and restarts. This process may take a few minutes in
extensive systems.