2N Lift8 v1.5.2 - Manual (Page 53)

53
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Before You Start
Product Completeness Check
Check the product for completeness before installation.
1 Audio Unit
2 wall plugs
2 wall plug screws
Requirements
This type of Audio Unit has no specific requirements.
Mounting
The Audio Unit is typically mounted on a wall using the supplied wall plugs and screws.
There is a drilling template in the product package.
Electrical Installation
Connectors
The Audio Unit has one connector for bus connection. The second RJ–11 connector is
used for handset connection. Both the connectors are under the side doors.
Caution
If no number is specified in the ALARM memory – set 2 (021–026), the
Audio Unit dials the numbers defined in the ALARM memory – set 1
(011–016).
Push the ALARM button to call the control room or machine room Audio
Unit configured as an intercom.
The ALARM and TRIPHONY buttons shine even at relax.
Caution
The Audio Unit is not intended for outdoor installations.