Call server – 2N Lift8 v1.5.2 User Manual

Page 149

149

Call Server

The Call server helps you configure the SIP lines for the

check calls. Enter the SIP

line parameters correctly for a successful SIP Proxy server registration. Make sure that
the lines and servers are configured correctly to make the Call server work properly. If
you use VoIP, obtain the SIP line settings from your VoIP provider. If you have a SIP
Proxy server of your own, contact your network administrator for correct settings.

Figure:

Call Server Menu

The Max count of lines parameter specifies how many SIP lines can be configured.
Having reached this limit, you will not be able to add more lines and will be notified of
this by the validator. Max simultaneous calls defines the maximum count of check calls
that can be processed simultaneously by the server. If more calls than as defined in
the parameter arrives in the server at one moment, all the excess calls will be rejected.
Call server state signals the current state of the server: Starting, Running, Waiting for
reconfiguration and Error.

Caution

Set the SIP lines in the

Use the settings of the PC on

2N Lift8 Server!

which the server is installed instead of your PC settings. Your PC settings
will be applied only if the server runs locally.