2N Lift8 v1.5.2 User Manual

Page 143

143

Figure:

Users – Lifts Menu

SIP Settings

Every user (Technician/Dispatcher) must be assigned a SIP line, i.e. an account
registered with a SIP provider or the PBX used for login via the

2N Lift8

. When you log in to the application, your line will be registered and

Communicator
you can process the calls coming to your line depending on the

configuratio

2N Lift8

n. An incoming alarm call will probably dial the dispatcher's account number. The
dispatcher can then contact the technician if necessary. Refer to S.8,

2N Lift8

, for details on these functions. Set the following SIP line parameters:

Communicator
Domain, Username and SIP account Password. Domain is the address of the server to
which the SIP client will log in. Enter the SIP Proxy server IP address or domain name.
Port 5060 is used by default. If your provider uses a different port, add this port to the
Domain parameter behind a colon as shown in the figure below. Click Save to confirm
the settings.