JLG X20JP - X600AJ Service Manual - Manual (Page 98)

SECTION 3 - CHASSIS & TURNTABLE
3-74 – JLG Lift – 3121623
Set speed adjustment lever „1“either to 1/2START or max.
START position, as desired or necessary.
Starting at a lower speed will help to prevent exhaust
smoke.
Recoil starter (down to –6 °C)
For starting preparations.
Starting procedure
– Pull the starting cable out by the handle until you feel a
slight resistance.
– Let the cable run back; in this way the entire length of
the starting cable can be used to start the engine.
– Devices which are not securely fastened should be
restrained with the foot.
– Grip the handle with both hands.
Commence pulling the starting cable vigorously and at an
increasing speed (do not jerk it violently) until the engine
starts.
NOTE: If after several attempts of starting the exhaust begins to
emit white smoke, move the speed adjustment lever to the
STOP position and pull the starting cable out slowly 5
times. Repeat the starting procedure.
Electric starter
g p
16