JLG X20JP - X600AJ Service Manual User Manual
Page 43
SECTION 3 - CHASSIS & TURNTABLE
3121623
– JLG Lift –
3-19
GEARBOX LUBRICATION
The motor and the gearbox have separate lubrication. The
gearbox is lubricated by oil splashing. The recommended oil
type has to be EP characteristics according to
MIL-L-2105 C & API GL5.
For standard working conditions, the recommended oil is:
For heavy duty working conditions (high loads, high duty
cycles or high ambient temperatures), the recommended oil
is:
In the following table the most common brands of lubricant
and the types recommended are shown.
DURING THE OPERATION THE OIL TEMPERATURE MUST NOT
EXCEED 85-90° C INTERMITTENT.
IN CASE OF LUBRICATION WITH SYNTHETIC OILS, IS RECOM-
MENDED TO USE ONLY OILS WITH PAO BASE IF NOT OTHER-
WISE SPECIFIED WHEN ORDERING. DO NOT MIX TOGETHER
OILS OF DIFFERENT BRANDS OR CHARACTERISTICS. USE OILS
LISTED IN THE TABLE OR SIMILAR PRODUCTS WITH EQUIVA-
LENT CHARACTERISTICS IN ORDER TO NOT MODIFY THE BRAKE
PERFORMANCES (IF PRESENT).
For information about characteristics of lubricating oils and
their proper use, please consult the lubricant suppliers
directly.