JLG X20JP - X600AJ Service Manual - Manual (Page 284)

SECTION 6 - JLG CONTROL SYSTEM
6-68 – JLG Lift – 3121623
SETUP 7 - TIME SETUP
This menu allows the setting of the clock.
1. Press button 6 "SERVICE"
2. Press button 7 "SETUP“.
3. Press button 5 “PASSWORD”.
Using the remote control buttons to enter the pass-
word 1468.
NOTE: password above allow to change the time.
Once the correct password is accepted the display
shown “OK”.
4. Press button 9 “ESC”.
Repeat the above steps if “NO” appear on the dis-
play.
5. Press button 7 “TIME” to enter in TIME SETUP.
1. Press buttons 1 Hours UP
2. Press buttons 2 Hours Down
3. Press buttons 3 Minutes UP
4. Press buttons 4 Minutes Down
Press 3 times button 9 to escape.
SETUP 8 - DATE SETUP
This menu allows the setting of the data.
1. Press button 6 "SERVICE"
2. Press button 7 "SETUP“.
3. Press button 5 “PASSWORD”.
Using the remote control buttons to enter the pass-
word 1468.
NOTE: password above allow to change the date.
Once the correct password is accepted the display
shown “OK”.
4. Press button 9 “ESC”.
Repeat the above steps if “NO” appear on the dis-
play.
5. Press button 8 “DATE” to enter in DATE SETUP.
1. Press buttons 1 Day UP
2. Press buttons 2 Month Down
3. Press buttons 3 Year UP
4. Press buttons 4 Year Down
Press 3 times button 9 to escape.