JLG 3246ES Service Manual - Manual (Page 47)

SECTION 3 - CHASSIS & SCISSOR ARMS
3121166 – JLG Lift – 3-11
Drive Motor Removal
NOTE: Applies only to:
USA machines built S/N 0200170585 to Present,
Belgium machines built S/N 1200015159 to Present.
CAUTION
ENSURE THE BATTERY DISCONNECT SWITCH IS IN THE OFF
POSITION BEFORE REMOVING DRIVE MOTOR.
1. Disconnect the motor cable from the power con-
trol module.
2. Drain the oil out of the unit by removing the cover
plug. Note the condition of the oil, replace if nec-
essary.
3. Remove the two motor mounting bolts and wash-
ers.
4. Gently remove the drive motor (1).
1. Drive Motor
2. Motor Mounting Bolts
3. Washers
4. Motor Cable
Figure 3-10. Motor Removal