Disassembly, Disassembly -7, Connector assembly (3 of 4) -7 – JLG 3246ES Service Manual User Manual
Page 183: Connector assembly (4 of 4) -7, Figure 7-8. connector assembly (3 of 4)), Ee figure 7-9. connector assembly (4 of
SECTION 7 - GENERAL ELECTRICAL INFORMATION & SCHEMATICS
3121166
– JLG Lift –
7-7
Figure 7-8. Connector Assembly (3 of 4)
Figure 7-9. Connector Assembly (4 of 4)
Disassembly
5. Insert a 4.8 mm (3/16”) wide screwdriver blade between the mating seal and one of the red wedge lock tabs.
6. Pry open the wedge lock to the open position.
7. While rotating the wire back and forth over a half turn (1/4 turn in each direction), gently pull the wire until the
contact is removed.
This manual is related to the following products: