Wedge lock, Wedge lock -8, Connector disassembly -8 – JLG 3246ES Service Manual User Manual
Page 184
SECTION 7 - GENERAL ELECTRICAL INFORMATION & SCHEMATICS
7-8
– JLG Lift –
3121166
Figure 7-10. Connector Disassembly
NOTE: The wedge lock should never be removed from the housing for insertion or removal of the contacts.
Wedge Lock
The wedge lock has slotted openings in the forward, or mating end. These slots accommodate circuit testing in the field,
by using a flat probe such as a pocket knife. DO NOT use a sharp point such as an ice pick.
This manual is related to the following products: