Eppendorf InjectMan NI 2 - Manual (Page 37)

90
5.3.11 Injection speed
By pressing and holding down the "Limit"
key the injection speed can be adjusted.
The current selected speed is indicated on
the display. The injection speed is reduced
with each acoustic signal.
The injection speed can also be fine-adjusted by way of
the "Inject" menu option.
5.3.12 Turn wheel
Setting the speed in the current speed mode.
Display of selected speed on-screen.
The turn wheel can be used to navigate round the menu and
select options.
When the "Menu" key is pressed the main
menu options are listed on the display at
the left. The selected option is framed by
two arrows (cursor).
The right hand column lists the submenu parameters
associated with the option. When a new main menu
option is selected the left hand column changes
accordingly.
The main menu options are selected by
moving the joystick back and forth or
rotating it.
Alternatively, the turn wheel can be used.
INJECT
600
µm/s
5.4 Parameter settings via menu
Speed –Submenu –
Inject Coarse
StepInj Fine
Home InjSpeed
Position StpSpeed
Install PosSpeed
Function HomSpeed
▲
▲
Speed –Submenu –
Inject Side
StepInj Direction
Home Angle
Position LCDLight
Install Beeper
Function MultUser
Invert Y
▲
▲
5 User control and mode of operation
User control and mode of operation
5
05_Bedien_en.fm Seite 90 Donnerstag, 6. Dezember 2012 1:34 13