Eppendorf InjectMan NI 2 - Manual (Page 18)

71
For right side mounting, the hinge must be at the right
outer (not visible here, on the rear).
The module unit is mounted from above onto the
hinged bracket (1).
Opening the hinged bracket
To open the hinged bracket beyond its normal
opening angle between 0° and 45° for mounting
purposes, push the pin on the hinge side up. The
slider is purposely hard to move. The unit is usually
only mounted once. The pin can be moved with the 4
mm Allen key.
The hinged bracket can then be opened to 90°. The
mounting holes on the module are then accessible.
1
0° – 45°
0° – 45°
45° – 90°
90°
4 Installation
Installation
4
04_Install_en.fm Seite 71 Donnerstag, 6. Dezember 2012 1:32 13