Apple Power Macintosh 7300 series - PC Compatibility Card - Manual (Page 99)

99
If you have removed your PC Compatibility Card from your Power Macintosh
4400 computer and want to reinstall it, see the PC Compatibility Card Update
that came with your computer.
If you have removed your PC Compatibility Card from your Power Macintosh
7300 computer and want to reinstall it, follow the instructions in this
appendix. (To remove the card, first follow the instructions on how to open
the computer, expansion card cover, and chassis in this appendix; then see
Appendix A.)
IMPORTANT If you will be installing a PC Serial and Parallel Card with your PC
Compatibility Card, it’s easiest to install both cards at the same time. The PC
Serial and Parallel Card has standard PC ports that allow you to use several
kinds of PC-compatible peripherals from the Windows or DOS environment
(not from the Mac OS environment). Instructions in this chapter indicate when
to see your PC Serial and Parallel Card manual for installation information.
WARNING Do not install the card that came installed in your Power
Macintosh 4400 into any other computer. Using this card in another
computer could damage the system or cause random crashes. Only
a Power Macintosh 4400 model can accommodate the power
consumption of this card. (You can install the card from a Power
Macintosh 7300 computer into other models).
Appendix B Reinstalling the PC Compatibility Card
in Your Power Macintosh 7300 Computer