Apple Power Macintosh 7300 series - PC Compatibility Card - Manual (Page 132)

Reinstalling the card
For more detailed instructions on reinstalling the card into your Power
Macintosh 7300 computer, see Appendix B. For detailed reinstallation
instructions for your Power Macintosh 4400 computer, see the PC
Compatibility Card Update that came with your computer.
1 Insert the card into the slot you removed it from.
2 Reconnect the cables to the card as they were before you removed them.
3 Make sure the cables are routed correctly (see Appendix B, step 20).
4 Replace the computer cover.
5 Reconnect the equipment cables to the card ports.
IMPORTANT Make sure you connect your monitor and PC game controller to
the correct ports on the PC Compatibility Card. (See Chapter 1 for more
information.)
Your PC Compatibility Card is now fully installed with extra memory and is
ready to use.
132 Appendix C