Apple Power Macintosh 7300 series - PC Compatibility Card - Manual (Page 14)

14 Chapter 2
There are several steps to installing your PC Compatibility Card software:
m installing the Mac OS software
m creating a storage area (called a drive container) for your PC software
m installing Windows 95
m installing support software for Windows 95
m installing PC utilities
Installing the Mac OS PC Compatibility software
To install the Mac OS software for operating your PC Compatibility Card,
follow these steps:
1 Insert the PC Compatibility Card – Mac OS Software CD into the CD-ROM drive.
If necessary, double-click the CD icon to open it.
2 Double-click the PC Compatibility Software folder to open it.
3 Double-click the Installer icon in the PC Compatibility Software folder.
If you see a message describing the Installer software, click OK.
The Installer window appears.
4 Make sure the disk named in the box is the one on which you want to install software.
If not, click Switch Disk until the correct disk name appears.
Note: If you want to install only specific components, choose Custom Install
from the Easy Install menu. In the Custom Install window, click to place an X
in the boxes next to the components you want to install.
5 Click Install.
The software is automatically installed on your hard disk.