beautypg.com

Connecting the sound out cable – Apple Power Macintosh 7300 series - PC Compatibility Card User Manual

Page 112

background image

Connecting the Sound Out cable

15

Disconnect the audio ribbon cable from the Macintosh logic board.

This cable is connected near the DRAM DIMM slots. The connector has four
pins and may be labeled “CD AUDIO” on the board.

This is the same cable you disconnected from the CD-ROM drive in
step 7. You will be replacing it with the cables that came installed with your
PC Compatibility Card.

112

Appendix B

This manual is related to the following products: