Apple Power Macintosh 7300 series - PC Compatibility Card - Manual (Page 145)

3 Type the following:
E:\APPLE\SETNET.EXE
The Network Protocol Setup dialog box appears.
You do not need to select an option in the Network Driver area. The SETNET
utility automatically detects the network driver you installed.
4 Select one or more network protocols that you installed by clicking checkboxes in the
“Select Protocol and Frame Type” area.
You can select more than one protocol if you have installed more than one. If
you are only using one protocol, be sure to select its checkbox and leave the
other checkboxes unselected.
5 If you are using TCP/IP, ARP, RARP (TCP/IP), or IPX/SPX, select the appropriate frame
type for each selected protocol by clicking the buttons in the “Select Protocol and Frame
Type” area.
6 Click OK.
7 Shut down Windows 95.
8 Switch to the Mac OS by pressing
x
-Return.
145 Installing Network Client Software