Apple Power Macintosh 7300 series - PC Compatibility Card - Manual (Page 96)

To remove a small plug attached to the card, grasp the sides of the plug and
pull firmly. It may help to gently rock the plug from side to side as you pull.
IMPORTANT Do not attempt to use pliers to remove any plugs; you may
damage the plugs, the card, or your computer.
2 Remove any other cables from the PC Compatibility Card.
If you have not already done so, remove the loopback cable and the PC
game controller cable (if one is attached) from the ports on the back of the
PC Compatibility Card.
If you are also removing a PC Serial and Parallel Card, detach the
peripheral flex cable from the PC Compatibility Card.
Gently rock
the plug. Don’t pull on
the cable.
96 Appendix A