Apple Power Macintosh 7300 series - PC Compatibility Card - Manual (Page 33)

Setting printer options
From the PC environment, you can print on most printers connected to the
Mac OS–compatible serial port or network connection, using the PC Print
Spooler software.
Note: The PowerPrint package by GDT Softworks lets you use a
PC-compatible parallel-port printer with your computer. For more
information, you can phone GDT at 800-663-6222 or 604-473-3600, or visit
their World Wide Web site at http://www.gdt.com.
Setting up printing in the Mac OS
To print from the PC environment on a printer connected to the computer’s
printer port or other network connection, you need to select a printer in the
Mac OS Chooser and set up the PC Print Spooler software. Follow these steps;
then go to “Setting Up Printing in the PC Environment,” later in this section.
Note: If you are printing from the PC environment using the optional PC
Serial and Parallel Card, see the manual that came with that card for
instructions on how to print from the PC environment.
1 In the Mac OS environment, open the Chooser in the Apple (
K
) menu and make sure a
printer is selected.
If you are using a PostScript ™ printer, be sure to select the LaserWriter 8
driver. For more information on selecting a printer, see the documentation or
onscreen help that came with your computer.
2 Open the Extensions folder inside the System Folder.
Note: You can also open the PC Print Spooler from the PC Setup Control
Strip module, then skip ahead to step 5.
33 Setting Up the PC Environment