Apple Power Macintosh 7300 series - PC Compatibility Card User Manual
Page 129
129
Adding Memory to Your PC Compatibility Card
Otherwise, make a note of where the audio cables are connected so you’ll
know where to reconnect them later. Then grasp the side of each plug and
pull firmly. Be sure to pull the plug, not the cable. It may help to gently rock
the plug from side to side as you pull.
IMPORTANT
Do not pull on or move the cables themselves. They are routed
under the chassis in a specific way.
Do not attempt to use pliers to remove these plugs; you may damage the plugs
or your card.
4
If you have installed a PC Serial and Parallel Card, unplug the peripheral flex cable (the
cable that connects the two cards) from your PC Compatibility Card.
5
Grasp the PC Compatibility Card by its sides (without touching any components on the
card) and pull it straight out of the slot.
IMPORTANT
Do not rock the card side to side as you remove it. Doing so may
break the card or damage the slot.
Gently rock
the plug.
Don’t pull on
the cable.