Apple Power Macintosh 7300 series - PC Compatibility Card - Manual

1
You can use a single monitor to switch between the PC environment and the
Mac OS environment. Or you can simultaneously display both environments
on two monitors. Any monitor you use must be connected in a specific way
for you to access your PC Compatibility Card software.
To learn how to connect your monitor or monitors, first read about using the
loopback cable on the next page. Then turn to the section on connecting a
single monitor or the section on connecting two monitors. Follow the
instructions for your model of Power Macintosh computer. If you have an
AudioVision or AppleVision monitor, turn to the section with additional
instructions for these monitors.
After you’ve connected your monitor, read the end of this chapter to find out
how to connect other equipment.
1
Connecting Monitors and Other Equipment