Apple Power Macintosh 7300 series - PC Compatibility Card - Manual (Page 152)

152 Appendix E
Installing and configuring MPEG video support
For instructions on installing basic video software and selecting monitor types
in Windows 95, see Chapter 2, “Installing the PC Compatibility Card
Software,” and Chapter 3, “Setting Up the PC Environment.” This section
provides information about installing MPEG video software in Windows 95.
Note: Not all of the features described in the ATI onscreen instructions are
supported by the PC Compatibility Card.
Your video software includes the ATI Video Player—an MPEG player for
Windows and Windows 95 that provides full-motion, full-screen, color
MPEG video playback. You must install the enhanced video drivers before
installing the ATI Video Player.
Installing MPEG video support in Windows 95
To install the MPEG video support, follow these steps:
1 Insert the PC Compatibility Card–PC Utilities CD into the CD-ROM drive.
2 Click Start, then choose Run from the menu that appears.
3 Type the following:
E: \VIDEO\ATISETUP
The ATI Setup Window appears.
4 Click ATI Video Player.
5 Follow the setup instructions to complete the installation.
Note: The ATI Installer looks for MPEG support software during the
installation process. If the necessary software is not found, the Installer
installs it and then restarts Windows 95. You will then need to repeat
steps 1 through 5 in order to install the MPEG video support.