Apple Power Macintosh 7300 series - PC Compatibility Card - Manual (Page 111)

13 Align the card with the first expansion slot.
Align the card’s connector end (gold in color) with the first PCI expansion
slot. The ports on the card should face the port access opening on the
computer’s back panel.
14 Insert the card.
The end of the card should engage the card guide at the front of the computer.
Press down on the card. When the card is fully inserted, you won’t be able to
see the gold-colored connector any more.
m Don’t rock the card from side to side; press it straight into the slot. Rocking
the card can damage the PCI slot.
m Don’t force the card. If you meet a lot of resistance, pull the card out and
try again.
m To see if the card is connected, pull it gently. If it resists, it is connected.
Port access
opening
As you lower the
card, you may find
it helpful to hold the
card slightly away
from the port access
opening until you actually
fit the card into its slot.
First PCI slot
Be sure that the card engages the card guide.
111 Reinstalling the PC Compatibility Card in Your Power Macintosh 7300 Computer