Buhler 2180 - Manual (Page 96)

SECTION 2 - OPERATION
2-50
2. Powershift Forward Gear While Moving
With the engine running, depress the neutral lock
button and move the control lever forward (the digital
display will show “F5” and the tractor will start to
move forward).
Increase engine speed and/or move the control lever
to the right and allow the transmission to run through
the gears until the desired operating speed is
achieved.
To further increase tractor speed, open the throttle
more and/or continue to hold the control lever to the
right to select a higher gear. To decrease speed,
close the throttle and/or hold the control lever to the
left to select a lower gear.
WARNING
Never move the control lever to neutral when
traveling at high speeds. This could allow the
transmission to speed match and it may not be
possible to reselect the original gear, particularly
if traveling down a steep grade. In any event,
actions such as coasting should never be
practiced for safety reasons.
80