Buhler 2180 User Manual
Page 201
SECTION 3 - LUBRICATION AND MAINTENANCE
3-13
EVERY 10 HOURS OF OPERATION OR DAILY
(WHICHEVER OCCURS FIRST)
OPERATION 2
CHECK ENGINE OIL LEVEL
Check the oil level when the tractor is parked on a
level surface and after the engine has been stopped
for a minimum of five minutes.
1. Remove the dipstick, 1, wipe clean and reinsert
fully.
2. Pull the dipstick out and check the oil level. The
oil level should be in the crosshatched area, 2.
3. Remove the filler cap, 3, and add fresh oil as
required until the oil level falls in the cross-
hatched area of the dipstick.
NOTE: Do not operate the engine with the oil level
below the bottom mark on the dipstick.
NOTE: Do not fill above the crosshatched area. The
excessive oil will burn off and give a false impression
of oil consumption.
Oil Specification: API CF-4
Refer to the “Specification” section for the correct oil
viscosity.
19