Buhler 2180 - Manual (Page 68)

SECTION 2 - OPERATION
2-22
AUTOMATIC ENGINE SHUTDOWN
An automatic engine shutdown feature is standard
equipment. This feature will automatically shut down
the engine within 30 seconds if engine oil pressure
falls below or engine coolant temperature rises
above predetermined levels. The engine will also
shut down after 30 seconds if the transmission low
pressure lamp or the transmission high temperature
lamp illuminates. See oil temperature software
described later in this section. This feature protects
the engine and drivetrain of an unattended tractor
carrying out stationary PTO work.
WARNING
The engine shutdown feature is fully automatic.
It can be overridden by the operator to drive the
tractor to a safe location. The override switch is
to the right of the steering column and should
only be used to move the tractor far enough to
avoid a dangerous situation, such as traffic.
A lamp is illuminated in the switch when override is
enabled. See “Shut Down Override Switch Opera-
tion” in the “Engine Operation” section later in this
section.
CENTRAL DISPLAY
Three liquid crystal displays (LCD) are located in the
center of the instrument cluster.
At the top of the display is the digital transmission
gear shift position display, 1.
In the center is the digital engine speed display, 2.
The bottom LCD, 3, will display:
• Engine hours accumulated (actual time)
• Tractor ground speed (MPH or km/h)
• PTO speed (rev/min)
• Service alert indicator
31