Buhler 2180 - Manual (Page 86)

SECTION 2 - OPERATION
2-40
INTERIOR LIGHTS
Two lights, 1, are provided to illuminate the cab
interior. Each light switch can be set to one of three
positions:
A On
B Off
C On when a door is opened
62
MULTI-FUNCTION SWITCH
The stalk-type multi-function switch operates the
horn, turn signals, headlight flash and is used to
select HI or LOW beam.
TURN SIGNALS
Move the stalk to position 1 to indicate a right-hand
turn. Move the stalk to position 4 to indicate a
left-hand turn.
The turn signal warning light (and trailer lights, if
connected) will also flash when the signals are
operated.
HEADLIGHTS HIGH/LOW BEAMS
With the headlights switched on, pull the stalk to
position 3, to change from one beam to the other
beam.
HEADLIGHT FLASH
With low beam headlights on, pull the stalk to position
2, to flash the high beams. Release the stalk to return
to low beams.
When the headlights are not on, pull the stalk to
position 2 to flash the high beam headlights, and then
release to turn off the high beams.
HORN
Press in the end of the stalk, 5, to actuate the horn.
63