Buhler 2180 - Manual (Page 213)

SECTION 3 - LUBRICATION AND MAINTENANCE
3-25
EVERY 50 HOURS
Four Wheel Drive (FWD) UltraSteer Front Axle Grease Fittings
Operations 22 through 28 cover FWD UltraSteer front axle lubrication. Lubricate by supplying grease through the
fittings.
NOTE: Lubricate at 10-hour intervals when operating in extremely wet, muddy or very dusty conditions.
Grease Specification: Use lithium base EP high temperature grease available from your Buhler
Versatile dealer.
OPERATION 22
LUBRICATE FWD ULTRASTEER AXLE
FRONT PIVOT PINS AND ROLLER STOPS
IMPORTANT: Lubricate until grease appears at both
ends of pivot pin.
41
OPERATION 23
LUBRICATE FWD ULTRASTEER AXLE
REAR PIVOT PIN
IMPORTANT: Lubricate until grease appears at both
ends of pivot pin.
42
OPERATION 24
LUBRICATE FWD ULTRASTEER AXLE
KINGPIN BEARINGS
(2 FITTINGS ON EACH AXLE END)
43