Buhler 2180 User Manual
Page 203
SECTION 3 - LUBRICATION AND MAINTENANCE
3-15
EVERY 10 HOURS OF OPERATION OR DAILY
(WHICHEVER OCCURS FIRST)
OPERATION 4
CHECK RADIATOR, OIL COOLER,
AIR CONDITIONER CONDENSER,
FUEL COOLER (MODELS 2180/2210)
AND INTERCOOLER CORES.
Check the cores for trash accumulation or blockage.
If any is noted, clean as follows (NOTE: model
2145/2160 arrangement shown):
1. Release the latches, 1, on the air conditioner
condenser, 2, and swing it open.
2. Use compressed air or a pressure washer for
cleaning. Do not exceed 7 bar (100 PSI).
3. Direct the air or water through each core from the
back to the front. Clean the radiator, 3, first; the
intercooler, 4, second; the oil cooler, 5, third; the
air conditioner condenser, 2, fourth; and if
applicable, the fuel cooler (not shown) last.
4. Straighten any bent fins.
NOTE: If the cores are blocked with any oily
substances, apply a detergent solution and remove
it with a pressure washer.
CAUTION
Wear eye protection and protective clothing
during the cleaning process. Clear the area of
bystanders so they are not struck by flying
particles.
21