Boss Audio Systems DIGITAL RECORDING STUDIO BR-1600CD User Manual

Page 26

Panel Descriptions

fig.05-01b

11. AUTO PUNCH IN/OUT

The AUTO PUNCH IN/OUT section is used to make settings
for the auto punch in/out function.

ON/OFF button:

This button is used to turn the auto punch function on and
off. The button’s indicator will light up when auto punch is
on.

IN button:

Sets the punch-in position. When pressed, the current
position is registered as the punch-in position and the
button’s indicator lights up. Once a punch-in position has
been registered, you can jump to this position at any time by
pressing [IN].

OUT button:

Sets the punch-out position. When pressed, the current
position is registered as the punch-out position and the
button’s indicator lights up. Once a punch-out position has
been registered, you can jump to this position at any time by
pressing [OUT].

DELETE button:

Deletes the current punch-in or punch-out position. To do
this, hold down [DELETE] and then press either [IN] or
[OUT] to delete the corresponding auto punch position.
When the [IN] or [OUT] setting is cleared in this way, its
indicator will be turned off.

12. ZERO button

Press to jump to the very beginning of the song.

13. REW button

The song will rewind while you hold down this button.

14. FF button

The song will fast-forward while you hold down this button.

15. REPEAT button

Selects a section of your song to listen to repeatedly (“Playing
back repeatedly (Repeat Function)” (Basic Operation; p. 17)).
This function is useful when you want to record several
times using punch-in and punch-out (p. 42) before saving the
best performance.

16. STOP button

This button stops song playback or recording.

17. PLAY button

Starts playback of your song. Alternatively, if [REC] has been
pressed and its indicator is flashing, you can also start
recording by pressing [PLAY]. During playback or recording,
this button’s indicator will light up in green.

16 17 18

BR-1600_R_e.book 26 ページ２００７年１２月６日　木曜日　午前９時５２分