Boss Audio Systems DIGITAL RECORDING STUDIO BR-1600CD - Manual (Page 101)

101
Insert effect parameter functions
Section 2
Pan
With the volume level of the left and right sides alternately
changing, when playing sound in stereo, you can get an
effect that makes the guitar sound appear to fly back and
forth between the speakers.
* This effect can be used in the “COSM OD GUITAR AMP” algorithm
when FX “FX Select” parameter is set to “PAN.”
Wave Shape 0–100
This adjusts changes in volume level.
Rate 0–100
Adjusts the frequency (speed) of the change.
Depth 0–100
Adjusts the depth of the effect.
Phaser
By adding varied-phase portions to the direct sound, the
phaser effect gives a whooshing, swirling character to the
sound.
* If the “COSM OD GUITAR AMP” algorithm is selected, this effect can
be used if “PH” is selected for the “FX Select” of the FX.
If other than “COSM OD GUITAR AMP” algorithm is selected, this
effect can be used if “PHASER” is selected for the “Effect Type” of the
Modulation.
Effect On/Off OFF, ON
This parameter turns the phaser effect on or off.
■ When “COSM OD GUITAR AMP”
algorithm is selected
Type
Selects the number of stages that the phaser effect will use.
Rate 0–100
Sets the rate of the phaser.
Depth 0–100
Sets the depth of the phaser.
Manual 0–100
Adjusts the center frequency of the phaser.
Resonance 0–100
This parameter sets the amount of resonance (or feedback).
Increasing the value will emphasize the effect, producing a more
unusual sound.
Step OFF, ON
This sets on or off of the step function. When the step function is
turned on, the change of a sound will be in steps.
Step Rate 0–100
This sets the cycle of the step function that changes the rate and
depth. When it is set to a higher value, the change will be finer.
Effect Level 0–100
This adjusts the volume of the phaser.
Direct Level 0–100
This adjusts the volume of the direct sound.
■ When algorithm other than “COSM OD
GUITAR AMP” is selected
Rate 0–100
This sets the rate of the Phaser effect.
Depth 0–100
Determines the depth of the Phaser effect.
Manual 0–100
Adjusts the center frequency of the phaser effect.
Resonance 0–100
Determines the amount of resonance (feedback). Increasing the value
will emphasize the effect, creating a more unusual sound.
Pickup Simulator
This produces the sound of different types of pickup. You
can produce thick humbucking-style sounds even with a
single-coil guitar.
* If the “COSM OD GUITAR AMP” algorithm is selected, this effect can
be used if “PIC” is selected for the “FX Select” of the FX.
Type
Select the pickup type.
Tone -50–+50
Adjusts the tone.
Level 0–100
Adjusts the volume.
4STAGE
This is a four-phase effect. A light phaser ef-
fect is obtained.
8STAGE
This is an eight-phase effect. It is a popular
phaser effect.
12STAGE
This is a twelve-phase effect. A deep phase
effect is obtained.
BIPHASE
This is the phaser with two phase shift cir-
cuits connected in series.
S TO H
(Single to Hum) This converts the sound of a single coil pick-
up to the sound of a humbucking pickup.
H TO S
(Hum to Single) This converts the sound of a humbucking
pickup to the sound of a single coil pickup.
H TO HF
(Hum to Half-tone)
This converts the sound of a humbuck-
ing pickup to the half-tone sound of a
single-coil pickup.
BR-1600_R_e.book 101 ページ ２００７年１２月６日 木曜日 午前９時５２分