Boss Audio Systems DIGITAL RECORDING STUDIO BR-1600CD - Manual (Page 158)

158
Creating drum patterns
To delete an item of performance data:
Press [F3] (DELETE).
fig.20-026fd
The selected item of performance data will be deleted.
To insert a new item of performance data:
Press [F1] (INSERT).
fig.20-026gd
An item of performance data will be inserted at the
current position.
4. Press [EXIT/NO] to end Microscope editing.
The Drum Pattern Edit screen will appear once again.
fig.20-210d
5. If you want to store the drum pattern that you have just
corrected, press [F4] (WRITE/COPY/DEL).
The Write/Copy/Delete screen for drum patterns will
appear.
fig.20-024d
6. Use the TIME/VALUE dial to select the drum pattern to
which the data is to be saved.
Only user drum patterns and song drum patterns may
be selected for saving drum pattern data. You will not be
able to select a preset drum pattern at this time.
7. Press [F4] (GO).
The drum pattern will be saved. When the message
“Complete!” appears, it indicates that saving has been
completed.
If you select a different drum pattern or load a new
song without saving the current pattern, all of the
corrected data will be lost. This data will also be lost
if you turn off the BR-1600CD before saving.
BR-1600_R_e.book 158 ページ ２００７年１２月６日 木曜日 午前９時５２分