Boss Audio Systems DIGITAL RECORDING STUDIO BR-1600CD - Manual (Page 161)

161
Creating drum patterns
Section 3
Deleting drum patterns
1. Press [F4] (WRITE/COPY/DEL) on the Drum Pattern
Edit screen.
The Write/Copy/Delete screen for drum patterns will
appear.
fig.20-324d
2. Press [F3] (=>DELETE).
The Delete screen for drum patterns will appear.
fig.20-037d
3. Use the TIME/VALUE dial to select the drum pattern to
be deleted and press [F4] (GO).
A confirmation message will appear.
fig.20-038d
4. Press [ENTER/YES].
Deletion of the drum pattern will begin. When the
message “Complete!” appears, it indicates that deletion
has been completed.
Loading drum patterns from the
CD-R/RW drive (SMF Import)
The BR-1600CD allows you to read Standard MIDI Files (or
SMFs) from CD-R/RW discs into user drum patterns and
song drum patterns.
Precautions for SMF import
● CR-R/RW discs of ISO9660 Level 2, Mode 1 format are
supported for import. It will not be possible to import
data from discs of any other format.
● SMFs of up to 240 KB in size and 8 measures may be
imported. It will not be possible to import files that
exceed this size and the number of mesures limit.
fig.20-039
1. Using a PC, burn a CD-R/RW disc containing the SMFs
you want to import.
2. Insert this CD-R/RW disc into the BR-1600CD’s CD-R/
RW drive.
The drive’s access indicator will begin to flash. Wait until
this indicator stops flashing and turns off before
proceeding.
3. Press CD-R/RW [DATA SAVE/LOAD].
The Data CD screen will appear.
fig.20-040d
• Preset drum patterns cannot be deleted.
• As it will not be possible to restore deleted drum
patterns, care should be taken to ensure that
important patterns are not accidentally deleted.
3
5, 10
4, 6
8, 9
7, 8, 9
2
BR-1600_R_e.book 161 ページ ２００７年１２月６日 木曜日 午前９時５２分