Konica Minolta Printgroove - Manual (Page 230)

Settings 7
Printgroove POD Ready 7-7
2
Click [Paper] tab if [Paper] tab is not displayed.
[Paper] sheet appears.
3
When you change the default paper, select the new default paper form
[Default Paper Name].
4
When you add new paper, enter the paper name is not there already in
the list, weight and thickness for the new paper to [Paper Name],
[Weight], and [Thickness]. Then click [Add/Edit].
The new paper name will be added as new entry.
– Enter the paper name within 32 letters.
– The unit of the weight is “g/m2”.
– Enter the Weight from 0 to 999.9.
– If paper name is already there in the list it will be updated with the
new weight and thickness.
5
When you change the weight and/or thickness, select the paper which
you want to change from the list and change the weight and/or thick-
ness for the selected paper to [Weight] and/or [Thickness]. Then click